Industrial Cement Polymer Concrete Floor Paint Sealer Hardener
high-quality premixed floor hardening agent. It is dense,
wear-resistant and non-slip surface mixed by high-quality cement,
screened wear-resistant quartz sand, high-quality synthetic fill
and imported high-quality synthetic additional polymer.
1. It is wear-resistant, compression, environmental and non-toxic
2. Construction is convenient and concrete is integration.
3. It has good impermeability, corrosion resistance and stable
Scope of application
It is used for the integrated high wear-resistant hard surface
formed on concrete surface, especially the
environment needs requests about floor surface hardness and wear
resistance such as garages, shopping malls,
factories, warehouses and so on.
Method of application
1. The cement content of base plane concrete should be at least
300kg/m3, the ratio of water with cement and oxygen content should
be controlled under 0.55 and 3%.
2. The outgoing water from concrete should be controlled and more
or less bleeding will directly affect the usage and performance.
3. The average usage of the product should be 4-6kg/sqm that will
create about 2-3mm thickness of wear-resistant layer.
4. The product should be operated by 2 times as the concrete of
base plane coagulates to a certain degree. No outgoing water but
the surface is still wet.
5. Sprinkle about 60% of the pre-usage materials on the concrete
surface evenly, and then start the first floating after the surface
water is absorbed, but no need to knead.
6. Sprinkle the rest materials as 2㎏/㎡on the concrete surface
evenly after the first time. The floating should
be done after the curing agent absorbing moisture and coming dark.
The surface troweling should be done
after the surface to certain hardness.
The appropriate maintenance is important to get the designed
physical performance on the surface of YunYan
non-metal wear-resisting floor hardening agent. The surface needs
to be cured by sealing wax agent after
mechanical troweling .
It is alkali chemicals that avoid splashing in the face, especially
in the eyes. Wash with plenty of water or ask
the doctor for help.
It is better to wear gloves, safety glasses, working clothes to
avoid skin contact.
It is non-toxic and non-flammable.
Execute china stander of JC/906-2002
Tensile resistant strength ≥11.5 Mpa
Compression strength ≥80 Mpa
Wear-resistant aggregate hardness ≥7
It should avoid direct sunlight and be stored off the ground on the
pallet to prevent rain soaked and avoid
over pressure. The product will lose efficacy or caking if no
follow the storage methods.