High Strength Epoxy Tile Grout , Industrial Unsanded Or Sanded
Grout For Mosaic
Epoxy tile grout is double component product, which is color
uniformity, durability and stain resistance, high compressive
strength, and has longer lasting color than general grout.
Especial apply to stone and mosaic pattern. for colorful stone
mosaic pattern, epoxy tile grout can be changed as pattern color,
make the pattern to be perfect.
Suitable for complicated colorful pattern.
Super anti fouling, resistance to chemical corrosion.
High compressive strength, good abrasion resistance.
Green environmental protection.
Easy to maintain, cleanable to the original color
Scope of application
Suitable for various tile, stone and different kind mosaic.
Apply to outside and inside floor and wall, kitchen and bathroom,
house and business place.
1. The working and construction temperature should be over 16 oC,
if the temperature is under 5oC , and over 40oC , should take
measures to control the construction place temperature.
2. Forbid to add any water and others material.
3. Each component must be mixed completely, otherwise it can not
got good workability.
4. Should take test on small range before large construction.
5. Do not mix again with water and use again.
1. Put A component first, and then put B in a clean barrel
together, use knife tool to mix the two components very completely.
2. After mixed, pour grout onto construction surface immediately,
use sponge knife to fill the joint, no joint left.
3. After 20-30 minutes use wet sponge to clean it first time, take
away needless grout, make the surface smooth.
4. Wash the sponge times to clean second and third time until there
are no grout on the tile surface, also fill hollow if left in
5. After 1 hours do final clean, make sure there are no grout on
the tile or mosaic surface.
6. After 24 hour when the grout dry completely, can be walk.
Modulus of Rupture/Mpa
Water Absorption(g) 30 minutes
2 years during 5oC-35oC condition.
5kgs/barrel or 2kg/barrel