Epoxy Tile Bonding Agent Fast Curing Grout For Kitchen / Bathroom /
This product is a milky white water-based paste body, clear taste
of environmental protection. Mainly adopts high-grade water-based
acrylic polymer emulsion and polymer inorganic fillers, high
toughness special fiber, additives. Scraping resistance is low, no
need to labeled with bandage, scraping directly. This product is
high solid content, range of shrinkage is small. It is used to bond
corner beads, no empty drum. The high toughness special fiber is
criss-cross, densely covered and uniform. It has strong tensile
strength, the surface dry time is 4h and actual drying time is 24h
at normal temperature.
Scope of application
The product is suitable for using in domestic outfit trough
embedded repair, apply to the wall cracks in large area,
effectively prevent the repair coating surface cracking of bearing,
Can also be used to paste the corner beads or obvious uneven place
of the wall. Prompting the inside and outside corner become
vertical at horizontal.
Scraping and brushing this product at trunking embedded mending
place with putty knife or other tools, fill the gap until fully,
Scraping the width ≥8cm, coating thickness need to reach more than
1.5 to 2.0 mm, when used to paste the corner beads should be fully
filled. Not too thick coating for one time scraping the uneven
place. Not use up product should sealed storage and use next time.
- This product is strictly forbidden to devour, contact with eyes or
sensitive parts of the body should wash immediately and go to see
the doctor immediately;
- Construction environment should be dry and ventilated, use this
product after cleaning contains dust and loose soft base;
- This product should be storage at ventilated, avoid light, dry
places, and room temperature should be 5 to 35 ℃, expiry date after
inspection qualified can still use. It can’t construct over 5℃.
- It is forbidden to add any solvent or powder in this product to
Theory of coated data 1 ㎡ / kg (1 mm thickness); The data is for
reference only, actual dosages are decided by base material,
construction method, coating width and thickness of the coating.
1. Brand Owner’s Authorization Letter is required to be issued
& provided for the corresponding production and exportation;
2. Quality only based on the samples which the buyer provided or
YUNYAN’s counter-sample confirmed by buyer.
In every case, the user alone is fully responsible for any
consequences deriving from the use of the product.
3. OEM MOQ: at least 1*20 feet container per item/color.
Minimum Order Quantity:
Composite paper bag w/. Plastic bag inside