Double Component Waterproof Roof Coating Cement Waterproofing
Additive , Non-Toxic
- With high waterproof, anti-seepage and anti-leakage, bonding
characteristics. It can be used to upstream face or downstream
face, with water or leaking stoppage under water.
- Initial setting hardening time is short (1-2 minutes),With rapid
hardening and high strength water plugging performance, stop water
- High pressure permeability, strong cohesive force, waterproof
adhesive can be completed at one time.
- Environmental and non-toxic, not aging, no pollution.
Scope of application
- All kinds of waterproof plugging of old and new buildings of brick
and concrete structure,more suitable for all kinds of underground
buildings, ditches, pools, etc of permeability plugging.
Setting time 7d
compressive strength 7d
bonding strength 7d
High temperature resistance
100℃ boiled 5h
No cracking and peeling, flaking
low temperature resistant
There were no changes on the coating
Description of construction
- Firstly make the leaking points or leaky seam into a "V" shape and
cleaning the sundries, According to the plugging agent: water = 1:3
will be mixing rapidly both into a paste.
- Put the mortar rapidly into a "V" shaped groove, compaction and
finishing, the water will be plugged generally in 5 minutes. For a
soakaway, can put the plugging agent into a pit directly,
compaction and finishing, sprinkling water to curing.
- For serious leaks, the drainage method, plug the wall firstly,and
then plugging the seam, stop up the drainage hole finally.
- For all leaking points, use lost circulation additive to stop up
first, and then use waterproof plaster.
- Mixing with water at one time and it is prohibited strictly to add
- When construction temperature is below - 10 ℃, you can use 40 ℃
warm water and stir.
- This product should be stored in a cool and dry place, valid for
one year. The bag after opening should be finished at one time.
Storage period : 6 months
1. Brand Owner’s Authorization Letter is required to be issued
& provided for the corresponding production and exportation;
2. Quality only based on the samples which the buyer provided or
YUNYAN’s counter-sample confirmed by buyer.
In every case, the user alone is fully responsible for any
consequences deriving from the use of the product.
3. OEM MOQ: at least 1*20 feet container per item/color.
4. Printery mold fee: USD250 for 3000 bags at least.
Package cost: USD0.40/bag
Printing lead time: 12-15days
Minimum Order Quantity:
Composite paper bag w/. Plastic bag inside