Construction Crystallized Waterproofing Cement Based Mortar In
WPS Waterproofing Mortar is cement based supplied in powder form
and formulated from Portland cement, fine quartz sand and active
chemicals. The chemicals require the presence of water in the
capillaries in order to form sealing crystals.
1. Environmental protection and non-toxic.
2. It can construction directly on the moist base plane.
3. Easy operation, good adaptability to complex concrete base
4. Have good penetrating function, penetration depth is deep,
continues for a long time.
5. Has waterproof function on negative surface, can Withstand high
6. Improve the compactness of concrete, enhance the strength of the
concrete, protect the concrete structure.
7. In the case has a slight crack(less than 0.4mm), this product
has the function of auto repair(Secondary permeability).
Scope of application
It’s used for basement, tunnel, mine, building foundation, dam and
other cement and concrete structure and specially applied to
Treatment of base plane
1. Base plane must be firm, smooth, and free of dust, oil, release
agents, batik materials and so on.
2. All the small gaps and hole can be filled which is mixed with
powder with a small amount of water.
3. For larger holes and cracks should be repair with repair mortar.
4. Base plane should be pre-wet, and be constructed after no clear
■ Mix 25kg powders with 6.5kg—7kg water; stir completely standing
for 5 minutes till even. It will get better effect by mechanical
■ Brush on the substrate with brush and roller. Brush 2 times or
above according to the construction requirement. The thickness of
general waterproof is 1.0mm, the underground’s is 1.5—2.0mm.
■ Brush the second time after the first layer become dry solid
■ Construction should be done from 5 to 40 oC.
■ Well-mixed sizing agent should be used within 2 hours.
■ Please adopt the appropriate protective measures when
construction, such as gloves, etc.
Keep in a cool and dry place, unopened product is valid for 1 year;
additive is valid for 6 months.
1. Brand Owner’s Authorization Letter is required to be issued
& provided for the corresponding production and exportation;
2. Quality only based on the samples which the buyer provided or
YUNYAN’s counter-sample confirmed by buyer.
In every case, the user alone is fully responsible for any
consequences deriving from the use of the product.
3. OEM MOQ: at least 1*20 feet container per item/color.
4. Printery mold fee: USD250 for 3000 bags at least.
Package cost: USD0.40/bag
Printing lead time: 12-15days
Minimum Order Quantity:
Composite paper bag w/. Plastic bag inside