High Strength Cement Mortar For Hollow Block , Epoxy Repair Mortar
YunYan efficient mortar is a new and effective mortar plasticizer,
it can make the mortar mixing easy and become soft, smooth
construction, improve work efficiency and construction schedule.
1. This product can replace all lime putty, and output of mortar
increase 10%-20%, so the economic benefit is remarkable.
2. It plays a good dispersion dissolve performance in the mortar,
can be mixed directly, and easy to stir well than lime putty,
reduce the cost of labor.
3. Non-toxic, green environmental protection, won't produce new
compounds, mainly have adsorption, scattered, decrease water,
foaming functions in the mortar.
4. This product is a micro bubble improved, with good decrease
water performance, make mortar more soft and higher strength.
Scope of application
Apply to all kinds of industrial and civil architecture of the
bonding mortar, plastering mortar.
It is applied in making concrete hollow bricks, hollow blocks,
Dosage: 0.5-1.2% of cement, usually every package of cement (100
kg) mixed with 1 kg.
Since it’s less usage, requirements extend mixing time, mechanical
stirring is a better.
Hand mixing: with sand, cement, efficient mortar mix well, then
adding water mixing 5 minutes again.
Mechanical agitation: with sand, cement, efficient mortar mix 1
minute, then adding water mixing 3-5 minutes.
Before plastering, wall surface should be drenched by water,
plaster when it is no obvious water.
When plastering, should be take on around 95% mortar to wall at
first time, and make the wall to be level off and uniform; If put
more than 20 mm thickness plastering, need to hierarchical
When operating, we should take the leveler up or 45 degrees up, not
pull down or 45 degrees down. After operating, use wooden floater
to rub, then use iron trowel knife press the surface again.
Standard requirement and result
Degree of stratification
Standard stirring %
≥4 (air content on standard stirring
Setting time deviation
Compressive strength ratio
Loss ratio of compressive strength %
Quality loss ratio %
Keep in cold and dry place, unopened product is valid for 1 year.
1. Brand Owner’s Authorization Letter is required to be issued
& provided for the corresponding production and exportation;
2. Quality only based on the samples which the buyer provided or
YUNYAN’s counter-sample confirmed by buyer.
In every case, the user alone is fully responsible for any
consequences deriving from the use of the product.
3. OEM MOQ: at least 1*20 feet container per item/color.
4. Printery mold fee: USD250 for 3000 bags at least.
Package cost: USD0.40/bag
Printing lead time: 12-15days