Blue Gloss Interior Emulsion Wall Paint / Silicon Acrylic-Acid
YUNYAN Silicon Acrylic-acid Finish Coat Advantages of both organic
and inorganic silicate coating, is a kind of organic silicone
modified acrylic acid super weather resistance exterior wall latex
1. The excellent corrosion resistance performance, more than five
years quality guarantee.
2. The film surface's tension is low, hydrophobic breathe freely.
3. Stain resistance, good self-cleaning function, make a lasting
buildings like new.
4. Antibacterial and mould-proof, protect the concrete from
Color: The color card or guest room requirement
Sheen: semi-gloss or glossy
Recoat time: more than 4 h (25 ℃), varies with temperature and
Surface treatment: The base surface must be clean, dry, firm and no
dust. The new metope should be fully dry for more than 30 days, the
moisture content < 8%, PH < 10; The mold wall use sand paper
to grind, so that remove the mould, it is necessary to brush again
washing mold water , and then clean again with clean water, paint
again after dry. It can use elastic waterproof putty spackling the
cracks on the wall.
Substrate batch of embedded—exterior wall putty
Primer - wall primer (one time)
Paint, water-based Silicon Acrylic-acid Finish Coat (2 times)
1. The exterior wall construction don't use interior wall putty and
glue with white cement, special recommend to use external wall
2. The surface construction temperature must below 50 ℃.
3. The dark emulsion paint need more coating number.
4. The diluted emulsion paint don't fall back to the original
packaging, seal the paint tightly if it is not used up.
5. The base surface must be clean, dry, firm and no dust. New
cement metope to maintain at least for a month, more than 7 weeks
in winter. Washing dust and bacterium from old wall with high
pressure, cleaning and airing, ensure that no oil and without
mildew algae and other attached objects. The mold wall use sand
paper to grind, so that remove the mould, it is necessary to brush
again washing mold water , and then clean again with clean water,
paint again after dry.
6. The construction temperature > 5 ℃, humidity < 85%, PH
< 10, wall's humidity < 6%, putty is fully dry, it can
construction when meet above conditions.
Please do not construction at the same time with polyester paint,
should construction polyester paint after the emulsion paint dry.
If construct on same plane, and they should be mixed in a larger
container before using, in order to make sure the color uniformity
of the whole.
7. Before construction should stir well, and the construction
according to the requirements.
8. Protection: more than seven days.
Health, environmental protection, application instructions:
1. Do not swallow, if liquid paint splashed into eye accidentally,
clean with water immediately;
2. Paint liquid waste disposal, it shall comply with the
environmental protection standard;
3. The product performance and application of listed above data are
obtained under experimental conditions, please according to our
18L/20 kg/bucket 5L/6kg/bucket
20 feet container load: 1000 buckets 20 feet container load: 3000
Minimum Order Quantity:
Composite paper bag w/. Plastic bag inside