Eco Friendly Interior Wall Pro Silk Emulsion Paint For Landmark
Building / Villas
Yunyan Pro Silk Wall Finish Coat adopt the new type of light
technology,Select imported raw materials and high-quality titanium
dioxide. Health, non-toxic and environmental protection, the paint
film is uniform, fine and smooth, presents the silky texture, noble
and beautiful, easy construction. Covering power is strong, brush
large area but paint consumption can be saved. mould proof and
anti-microbial, paint film lasting long without peeling off, easy
to clean and maintenance. Color retention more than ten years. Make
decorated wall and ceiling suddenly unripe brightness, add elegance
and lively, comfortable adornment effect.
As noble as silk.
Waterproof properties is good
Easy to brush
Good mildew resistance and alkali resistance
Long lasting color
Covering power is strong
Scope of application
Decorate and protect the indoor wall at the base plane,such as
plaster, gypsum board surface, etc. Used in large government
projects, landmark buildings, memorial hall, private villas,
fashion decoration users of interior wall coating.
Quality standard: in accordance with the national standard
Safety performance: in line with the "environment mark product"
national standard and national standard GB18582-2001 interior
decoration materials safety standards.
Main ingredients: acrylic copolymer, pigments, water, and not
Color: white and different colors
Recoat time: 2 h (25 ℃)
Storage: use cap sealed tightly, stored in a cool, dry place. Valid
for 24 months
Packing specification: 18 L / 20kg/barrel.
Brush area: the theoretical value is 11 to 15 ㎡ / L/layer.
Construction tools: brusher, roller, the common spraying and
Dilution: diluted with water, the maximum of water addition is 20%
Spraying advice: requirements for equipment, the minimum working
pressure of 140 kg/C ㎡, nozzle size 0.58 mm, nozzle angle is 65
Cleaning tools: with clean water
Suggested use:1 primer and 2 finish
The construction temperature > 5 ℃, humidity < 85%, PH <
10, try to avoid low temperature construction.
In winter construction, the painting time of emulsion paint should
be longer than the summer requirements.
1. The base surface must be clean, dry, firm and no dust. New
cement metope to maintain at least for a month, more than 7 weeks
in winter. Washing dust and bacterium from old wall with high
pressure, cleaning and airing, ensure that no oil and without
mildew algae and other attached objects. The mold wall use sand
paper to grind, so that remove the mould, it is necessary to brush
again washing mold water , and then clean again with clean water,
paint again after dry.
2. Please do not construction at the same time with polyester
paint, should construction polyester paint after the emulsion paint
3. Before construction should stir well, and the construction
according to the requirements.
4. Protection: more than seven days.
Coating techniques: if you use the same color different batch of
paint brush on the same plane, and they should be mixed in a larger
container before using, in order to make sure the color uniformity
of the whole.
Health, environmental protection, application instructions:
1. Do not swallow, if liquid paint splashed into eye accidentally,
clean with water immediately;
2. Paint liquid waste disposal, it shall comply with the
environmental protection standard;
3. The product performance and application of listed above data are
obtained under experimental conditions, please according to our
18L/20 kg/bucket 5L/6kg/bucket
20 feet container load: 1000 buckets 20 feet container load: 3000
1. Brand Owner’s Authorization Letter is required to be issued
& provided for the corresponding production and exportation;
2. Quality only based on the samples which the buyer provided or
YUNYAN’s counter-sample confirmed by buyer.
In every case, the user alone is fully responsible for any
consequences deriving from the use of the product.
3.OEM MOQ: at least 1*20 feet container per item/color.
Minimum Order Quantity:
Composite paper bag w/. Plastic bag inside