Water Based White Marble Epoxy Stone Adhesive High Grade Epoxy Glue
- Fast curing speed, good gloss, high hardness and it has thixotropy;
- Weatherability is very good, not yellowing, oil resistant, water
resistant, chemical mediator resistant, small contractility.
- Excellent grinding and polishing ability.
Scope of application
Mainly used in white marble, jade processing industry, used to
repair cracks, holes, sand holes, ants road, uneven natural stone.
Initial curing time
White paste body
White paste body
1.The stone surface should be dry and clean;
2.According to the glue weight ratio A: B = 1:1 to mix evenly and
3. The mixture’s work time is 20 to 30 minutes(25℃),scraping and
brushing with scraper;
4. At room temperature (25 ℃) after about 24 hours, you can do next
working procedure on the processing surface.
- The adhesive solution must be used after mixing evenly;
- After mixing glue, it must be used up within the valid time;
- Don’t mix to use the tools of A and B component;
- Using production samples in advance before producing to ensure the
Shipping and package
- Sealed storage in a cool and dry ventilated place, valid for one
year, expired products after inspection qualified can continue to
- Store and transport according to the general dangerous goods;
3. Packing specification: 0.5kg/tin, 1kg/group
Executive standard:GB18583-2001and JC887-2001 span>1�a>�o��[endif]>The
adhesive part should be clean, dry, remove impurities such as dust,
- After mix well the glue according to regulations, apply with stone
glue bonding parts, press the fixture, motionless and
solidification; you can do the next procedure after 24 hours curing
in room temperature; The low temperature in winter, can heat the
plank after coating at 50 to 60 ℃, placed into next working
procedure after 2-3 hours;
- According to different color stone to add special toner which color
is closed to stone color, at most quantity of toner is 5% of glue's
- Squeeze out excess adhesive bonding parts, before curing can use
cloth to dip small amount of alcohol or acetone to clean.
1.Glue must be mixing as proportion to avoid affect the use effect;
2. The construction temperature cannot be lower than 5 ℃ , heating
in winter in order to improve the curing rate and the bonding
3. Matching the glue when you use, should not mix too much for
one-time, the glue must be finished within the available time, do
not use it after becoming gel; The higher the temperature of mixing
and the more quantity of the glue, the available time will be
shorter, or it will be longer;
4. It must be pressurized and solidification after bonding
plurilateral, do not move the stone before the glue completely dry;
5. Do not mix container of components A and B , do not put the
residual blended adhesive liquid back to the original packaging;
6. If the viscosity pf adhesive is bigger, not convenient to use,
can add 3% of anhydrous ethanol or acetone in glue to dilute, also
can be heating at 40-60 ℃ water to reduce its viscosity.
7. Do not mix cover the lid, cover tightly after using, do not eat;
8. Because of the stone material, chemical and physical properties
are different, please try in advance before using this product, so
as to avoid mistakes!
Shipping and Package
- The sealed store in a cool and dry ventilated place, valid for one
year, expired after inspection qualified can continue to use;
- Non-flammable, non-toxic after curing, it can be mailed, expressed;
- 1. Packaging specifications: 2 kg/set (1kg/tin).
Executive standard: Q/BUEZ 003-2005
Reference dosage:2.5 Kg/m2