Insulated Mortar Exterior Insulation Finishing System , XPS / EPS
Bonding Adhesive Mortar
■It has low thermal conductivity and good thermal insulation
property that can inhibit the difference in temperature of the wall
between summer and winter season effectively.
■It has good cohesive force and be suitable for different base
■It has low contraction efficiency that can prevent effectively the
cracking and hollowing and avoid forming hot and cold bridge.
■The construction is convenient and the product can be used after
adding water and stirring.
■It is fire-retardant, non-toxic, environmental and good weather
■It if fast drying and drought, has good construction property.
Scope of application
■It is suitable for the insulations of various internal and
exterior walls and different household floors, basements and
heating system, etc.
■It is suitable for the play mode built-in that can make a
protective layer for the EPS.XPS thermal insulation system.
Treatment of base plane
■The base materials should be smooth, strong, clean, and dry and
non-grease, concrete curing admixture and other loose materials.
■Depend on the thermal insulation thickness.
■Mix thermal insulation glazed hollow bead mortar and water as
mixing ratio of 25: (26-5) kg, string completely and standing for 5
minutes, then stir again to get better effect.
■Plaster the mortar on the wall evenly, leveling with scraper; the
thickness of mortar for each time should be about 2 centimeters,
and interval is about 24hours.
■The curing time of thermal insulation glazed hollow bead mortar
should be more than 5 days, depending on the thickness and
■The insulation layer should be covered by alkali resistant mash
cloth and mortar overlay which should use the polymer mortar with
good flexibility and excellent water resistance.
■It should be operated in 5 ℃ -40 ℃ environment.
■The crust should be removed the surface of mortar becoming dry and
■Never mix the dried mortar with water to reuse.
■Keep in cold and dry place, unopened product is valid for 1 year.