High Flexible Single Component Of Cementitious Concrete Foundation
1.100% pure polyurethane, it will absorb moisture in the air and
the moisture will be curing film at the base plane after painting.
It is a new environmental friendly products;
2. Particularly suitable for wet surface and complex structure of
waterproof construction, without solvent volatilization,
3. The construction is safe and convenient, single component
construction does not need to mix. The coating is firm and high
elastic after curing.
4.Stable performance, heat and cold resistant(-40℃-95℃), Chemical
5. Strong cohesive force, it can bond concrete, brick, wood, glass,
metal, rubber and other base material.
6. Basic color is red, you can brush various color on the coating
Executive standard: GB/T9250-2003
Tensile strength Mpa
Solid content %
Low temperature flexibility
Scope of application
- The structure of the flat sloping roof, roof gutter, rainshed, and
various irregular roof, especially for beautiful roof, , overpasses
and playground’s waterproof processing;
- It can be used for all kinds of water conservancy projects, such as
water channel, the construction of waterproof and sealed plugging；
- Indoor and outdoor walls’ waterproof, moistureproof and decoration;
Chemical plant, steel mills, power stations and roof of the
corrosion environment and with acid, alkali, salt, oil pool outside
- Indoor floor, bathroom, bathroom, garden, flower bed, hot spring
pool, swimming pool, sewage ponds and cold storage floor of
- Sealed waterproof for all kinds of doors and windows, wall tube and
- Metal, pipe surface and galvanized roofing anticorrosive, antirust,
- Removal of debris, stains, dust from the surface of base, the
coating part should be solid, clean, without clear water;
- To use this product to seal 2mm cracks at the base plane;
- Metal surface must remove rust first and then apply this product;
- To do node processing first, then scrape and brush this product
evenly on clean base plane with the right tools(such as plastic or
- The coating thickness is more than 2 mm, scraping can be divided
into 2 to 3 times, you can brush the second paint when the coating
is non-stick, surface direction should be perpendicular to each
- Reference dosage: (1.0 mm thick) 1.2 —1.5 kg / ㎡; (1.5 mm thick)
1.8 —2.0 kg / ㎡; (2.0 mm thick) 2.4 —2.8 kg / ㎡.
- We suggest to seal immediately or one-time use after opening.
- When the product storage period is long, it will form a thin layer
of glue on coating surface, you can remove it when you use. It does
not affect the use.
- The coating thickness should be uniform, close tightly.
- Construction temperature should be above 0 ℃, construction
environment should keep the air circulation.
Storage, transportation and packing
- This product is a non-dangerous goods, non-toxic, tasteless, no
pollution, it is safe to transport;
- You should pay attention to seal when storing, and stored in indoor
and ventilated, cool, dry place;
- The shelf life is 6 months;
- Packing: 25KG/ barrel